EE/CpE 440 Class Notes*
* the slides reference the 10/29/02 version, but the 2/25/03 version is essentially the same
|
Slides
|
|
MPEG displays ** |
|
Reference
Materials
|
|
** Note: These MPEG files are about 35MB each. Make sure you have a high speed connection before opening them! For the FFT output, the horizontal scale is the full bandwidth of the OFDM receiver, about 800 kHz (189 tones). The vertical scale is signal power in dB, 10 dB per division. For the demodulator output, there are three QPSK constellations. The center is the combined receiver output. The others are the individual receiver outputs. |
|
This material is provided for the specific use of students enrolled in EE/CpE 440 and for general research purposes only. Deep linking to this page or subsequent pages is permitted, as long as proper attribution of the source is provided. Electronic or other duplication of this material without prior permission is prohibited. © 2002 Stevens Institute of Technology All rights reserved |
This page was last updated on: February 25, 2003